• Welcome to For E Bodies Only !

    We are a community of Plymouth Cuda and Dodge Challenger owners. Join now! Its Free!

Moparbastard's latest activity

  • M
    Moparbastard replied to the thread 71 340 OIL CONVENTIONAL/SYNTHETIC.
    Sadly, Rotella no longer has sufficient zinc and phosphorus additives for use with flat tappets. Also little packets or bottles of ZDDP...
  • M
    Moparbastard replied to the thread 71 340 OIL CONVENTIONAL/SYNTHETIC.
    Use only mineral oil - Driven brand with zinc for flat tappets. With roller cam you can use any mineral oil. My machine shop says...
  • M
    Moparbastard replied to the thread Push rods.
    That is correct. The follow up question is, why did Chrysler do that?
  • M
    Moparbastard replied to the thread Push rods.
    Respectfully, that is incorrect. I built just such an engine. Look up the part numbers. These LAs oiled both ways from the factory. 1989...
  • M
    Moparbastard replied to the thread Push rods.
    The later roller cam LA engines oiled through the cam bearing and the lifters. They had oil holes in the push rods and modified the...
  • M
    Moparbastard posted the thread 1970 Challenger slant six Y09 car update in General Topics.
    It's been a while since I posted about bringing my slant six '70 Challenger back from Thailand. So much to unpack - Thai red tape is...
    • CIMG7339.JPG
    • CIMG7387.JPG
    • CIMG7394.JPG
    • CIMG7415.JPG
  • M
    Moparbastard replied to the thread There is no ugly.
    Put the hemi in the Satellite. Nix the tunnel ram and leave the flat hood. Perfect!
Show older items
Back
Top