MoparCarGuy - great pic, thanks! I don't have a hole in the firewall in that locaton, but a dimple is present. I have a hole that looks like about the same size about 4" directly below the throttle cable hole. It is plugged with a grommet. I wonder if there is a difference between 70 & 71...
It looks like the in-dash light wire plugs into the harness from the switch, and the wire has a grommet on it to pass through the firewall? Where is the location of this hole in the firewall?
I don't believe I have NOX, so I'll go with the one that says without.
Challenger RTA, thanks for the pix, the diagram is helpful.
I'm confused about the first pic however. What connector pair is that and where do the wires go to? I thought the wires from the trans switch would plug directly...
I'm in the process of having my A-833 transmission rebuilt. The car is a 71 Cuda with 383 and 4-speed. When I purchased the car a couple of years back, it was missing the back up light wire harness that connects to the switch on the trans, and also the interior one that goes to the individual...
Thank you for the info. I'm having mine rebuilt locally, hoping for good results. Mine shifted fine, just leaked from every possible place. Plus, my shifter was not great.
Any tips on tank removal / installation? I assume pull the filler neck out first? I was thinking I should order a new filler neck because mine has a dent in the tube visible in the trunk, but looking at a new one, it has that too. Weird. Also, why is there 4 vent tubes on the top of the...
Well, today I cleaned up the old sending unit a bit (not a lot), and got the float arm swinging freely. Oh, the float is about 1/4 full of gas. With the unit outside the tank, I hooked it up with jumpers to the gauge wire and a ground, set the float to the high position, and sure enough, my...
I love this forum! So helpful. You two inspired me, so I took a screwdriver and hammer to it and it came right off. Here is a picture of the crusty old thing, and another with it hanging upside down and the float does not ever fall by gravity of its own weight. I'm ordering a new one. I...
Well folks, my frustration with this project is really growing. I was excited to use my new lock ring removal tool, but it will not get good enough purchase on the lock ring to remove it. It just doesn't fit that well. I've tried modifying it to work, but still no good. It also appears that...
Just got my new ground strap and lock ring removal tool. Siphoned about 9 gallons out of the tank, should be well below the sending unit. I did another resistance test, the previous one showed 57 ohms with what I thought was a full tank, after removing about 9 gallons, it reads 76.3 ohms...
Sorry, just posted this reply on the wrong thread. I just did a resistance check, it reads 57 ohms. I think the tank is full, but something is odd with that too. I was driving a couple weeks ago and ran out of gas. I had someone bring me some, and I put in about 2 gallons. Then I went to the...