70 Challenger Mini Tub.

[1moretoy]

Well, I finally finished the trunk pan, mini tub and Frame notch. Next up is the rear suspension and subframe connectors. I'll be posting videos on my yourtube channel if you guys want to follow along. Thanks for all your help so far. I'm sure I'll have more questions along the way.

https://youtube.com/@HellcatKev?si=OeQAYT188_0hWi0R

 

[6PKRTSE]

Looking good so far.

 

[1moretoy]

Looking good so far.

Thank you!

 

[1moretoy]

It’s hard to tell from the pictures if you look at the bottom of the frame rail there a two bolt holes that a factory bracket bolts to I believe it was used to secure the car doing shipping from the factory that’s where the notch ends you need the frame rail to parallel the inner tub

View attachment 116954

View attachment 116955

Any install photos of your inboard spring mounts?

 

[Pistolgrip496]

Any install photos of your inboard spring mounts?

 

[Pistolgrip496]

View attachment 123643

View attachment 123644

View attachment 123645

View attachment 123646

View attachment 123647

View attachment 123648

View attachment 123649

View attachment 123650

View attachment 123651

 

[1moretoy]

View attachment 123652

View attachment 123653

View attachment 123654

View attachment 123655

Thanks for the quick response? Are those the RMS boxes? I'm trying to figure out how to install. All the photos I see online have the boxes mounting against the leaf spring mounting pad like yours. If I mounted the box flush with the end of the frame rail it makes the box a 1/2" short on the back mounting pad.

 

[Pistolgrip496]

Thanks for the quick response? Are those the RMS boxes? I'm trying to figure out how to install. All the photos I see online have the boxes mounting against the leaf spring mounting pad like yours. If I mounted the box flush with the end of the frame rail it makes the box a 1/2" short on the back mounting pad.

View attachment 123656

View attachment 123657

View attachment 123658

View attachment 123659

Yes
They are RMS