Someone posted in another thread what a Napa part # was for clips for Challenger belt moulding retaining clips, not factory but the would work. I can't find that thread and nothing comes up in the search. Anyone have that part #?
I need both left and right rear quarter stainless steel belt Mouldings that run along tops of quarters under windows that mate up to the door belt mouldings as pictured above red line.
My car won cruiser of the week the other night. Funny thing is they told me they wanted to award it a several times over the years, but assumed it was a race car I trailered in, unloaded around the corner and parked.
It wasn't until someone else told the car club officials that no, he drives it...
I am look for the 5 pieces for the belt moldings for a Challenger. The piece at the rear of the hood and across the tops of the doors and quarters, along with the front valence trim piece. PM me if anyone has any of these pieces. 1 or all.
I am looking for a set of gray spoke, silver outer lip American Racing S200 "Daisy" torque thrust looking wheels. Two 15x7 and two 15x8 w/4-1/2" B.S. or 15x10 w/5-1/2" B.S. in a Ford/Mopar 4-1/2" bolt pattern like pictured.
I found a 74 Barracuda that a friend of a friend of a friend kind of deal offered to me. Man, not much out there to compare to. What's a 74' project car worth? I am supposed to go look at it this weekend. Story goes. Now has mild built 383 with 284/484 cam, has built trans, runs and drives but...
I am looking for the back seat body diagonal bracing behind the rear seat that mounts to rear package tray and floor pans if anyone cut some out of an old rusty or parts car. As pictured. Pm me here.
Had to clear a tunnel ram, dual dominator carbs and 2 fogger kits so I came up with the super shaker idea. Stretched the hood opening length by 3", stretched the base and bubble 3" also. Raised the height 4-1/2" and opened up the nostrils 2-1/2" taller.
What is the width of a Challenger shaker hood trim ring around the exposed area when mounted to the hood? (The visual top side seen when the hood is closed).
FORBBODIES only has one. I didn't see one here. Let's see everyone's shop, pole barns, or garages. What are you working on in your shops? Last one to post wins.... Here are 2 of mine.
Wanted: Looking for an old original or reproduction Shaker hood seal. I just need a small portion of the seal so any damaged or even pieces of one would be fine. Probably 12"-18" or more would work. Would consider a whole seal if the price was right.
I am looking for a Hemi shaker base plate & scoop for a shaker hood for a 70-71 Challenger. Beat up originals, reproduction fiberglass or steel reproductions would be okay also. I will be cutting them both up to adapt to fit my dual Dominator carbs anyway.
Anyone have a scrap firewall or parts car they would be willing to cut out the center top 12 or so inches out of the firewall? I am thinking it may be easier to piece in a section rather that try to fix my firewall. I purchased my car with this weird firewall damage & I would like to repair it...
Anyone own or have pictures of a column auto or 3 spd on the tree E Body w/console? Was it a possible combo. Looking for a console in particular with no shifter opening hole.