Search results for query: *

****FREE 1971 Cuda glass ( 2-Quarter, 2-door, Rear glass), everything is Factory date coded (April 71) except the Drivers side door glass which is a PPG replacement. The driver side door and Quarter glass have light sand blast etching in about a 1 1/2" in diameter near the edges (see last...

I am looking for a correct date coded 489 center section for a 8.75 rear axle (either bare housing or complete drop out). I am trying to find one with a date code between 0201-0901(January 20,1971-March 31,1971 for my build. Will buy or trade for a complete January 12, 1970 489 with a 3.55 cone...

Reconditioned small block 318/340/360 10.5" small block bellhousing cast #3743859 originally manufactured for 75-6 A-body/1975-80 F-body/1976-80 trucks using A-833 transmissions but will fit B/E applications with appropriate fork pivot bracket which is also provided in sale. This bell housing...

For Sale: Edelbrock LD340 intake/Carter AFB 625 carb and Mopar electronic Distributor. This running combination was on my Cuda until October (2017)and last May(2017) I had the engine professionally tuned by DCI Motorsports to ensure trouble free driving. This combination worked perfect but since...

Looking for a 1971 340 Manual transmission Dual Point Distributor part #3834522. P.M or email me at myorangewagon@yahoo.com

I am selling a Chrome plated Six Pack/ Six BBL Air cleaner Lid only (No Base). This is an aftermarket Mopar Performance lid not an OEM part. My father had it chrome plated several years ago and only used it 1 season before hanging it on the wall to be used as garage art. $125 + shipping. Item is...

I am looking for a good used set of OEM 70-74 E body front frame rails either. I do not need full rails, cut off just forward of the firewall is ok. I am looking for both sides. I am also looking for a rear driver side frame rail section from behind the wheel well arch to the back cross member...

FYI..... about a month from now is the annual Mopar car show at Summit Racing in Tallmadge, Ohio I hope there is a great turn out this year because we have some very cool Mopars planning on attending. Please mark your calendar... this is your chance to see some cool Mopars, some from the...

Hello everybody, I am in looking to buy a passenger side Belt molding that fits on the top of the quarter panel, it must be in nice condition and must have the mounting tab. Please message me if you can help me out. Thank you for looking... Ross

Hello FEBO, in the quest to find all the correct parts to put on my 1971 340 Cuda I am in need of an E body K frame part #3583052. Unfortunately my car currently has a 68-69 B Body K, so it has to go. Please P.M or E-mail me at myorangewagon@yahoo.com if you can help me out. Thank you, Ross

I have noticed that most 1971 'Cuda 340 K frame's I research on the internet have the sway bar going through the K frame and mine doesn't look like that at all. It looks like some drilled through the K and bolted the sway bar to it. After searching the internet it looks like my car has an...

I need a 71 'Cuda grille lower support bracket like in the picture, I will buy a pair but only need one for the right side. PM or email me at myorangewagon@yahoo.com if you can help me out. Thank you Ross

I am selling a (new) set of 1971 'Cuda argent headlight bezels. I assume they are reproductions but there is a part number on them, I received them as extra parts when I bought a car back in September. My car should have a painted grille so these are the wrong ones for my restoration. P.M. or...

I am looking for a 1971 340 Exhaust Manifold part # 3418623. My SPD is 4-30-71 and my 3418621 drivers manifold build date is March 1971 so I am looking for something close to that build date. You can P.M or Email me at myorangewagon@yahoo.com. Thanks

I am looking for a complete 1971-74 E body Clutch Pedal Safety Switch part # 3488177 for my 1971 Cuda. Please P.M or E-mail me at myorangewagon@yahoo.com.

MY 71 Cuda' has a Rallye dash that I know is not original to the car, it is coded on the broadcast sheet for the standard gauge cluster. I'm debating if I want to restore it or put the car back to the original standard dash and my question is what is it really out of ? Through my research I see...

Welcome to my build thread this car is a 1971 340 Cuda that left the factory with a 4 speed, Shaker hood, EV2 Tor-red paint and Billboard stripe. Although it look nice on the top side (that’s a $400 Maaco paint job from 1990) it needs some real attention underneath. The floor and trunk pans are...

I am looking for a 1971 LH (Driver) Exhaust Manifold part number 3418621. Date code must be before 4 30 71. Thank you in advance

I have a set of 15" x 7" Rallye wheels off a 1970 AAR Cuda' in excellent condition (no pitting) and am trying to determine the value since they are not correct for my 1971 Cuda' that I am getting ready to restore. My car should have steel "450" wheels. Does anyone have an realistic value of the...

Hello FEBO, I've been along time FABO member and recently completed my Duster, and just bought back my 1971 Cuda' that doesn't have 500 miles on it since I sold it back in 1990. Here are some of the spec's... factory 1971 Cuda 340, 4 speed, Billboard, Shaker, EV2, Road Lamps, Center Console...