SOLD 1971 Dodge Challenger

[Deepsubject]

1971 dodge challenger it has a 383 motor it has been freshened up , with 413 wedge heads , new 484 lift cam lifters dubble roller time chain, hooker long tube headers, holly 4bbl carb & alum intake msd 6al spark box, mallory coil,triple pass racing cooler with dubble electric fans , & raceing tranz cooler with remote tranz filter, mark Dudley performance build 727 transmission with driveshaft loop , 8 3/4 rear end 3.91 pos gears all new brakes front disk & big back drums, lines, master cyl , dis block and all as well , new coil over shocks and track bars, sub frame connectors, new front and rear sway bars, new gas tank and lines and new flip top gasdoor , factory rims have been sa ndblaster a powder coated, new floor pan , new carpet, headliner, dash top, seats have been recovered front buckets and back bench seat new retro belts, factory console & slap stick snifter and recovered factory tuff wheel, new am / fm / sd / radio with power ant , new windsheld and new back glass vent shade,

the needs front door panels inside .
and finish installing aftermarket sport gadges .
both rear qtrs but i have both new full qts .
paint , i have a gal of ppg Factory B-5 Blue paint.
front and rear t/a spoilers need to be mounted .
and i have new R/T logos, black R/T side stripes and R/T side scoops .
NOTE : TRUNK PANS ARE GOOD !!! FLOOR PANS ARE GOOD !!!!
IT WAS A FACTORY 318 motor 904tranz , 276 gear rear end .... I HAVE THE BUILD SHEET ..
TITLE IS GOOD & IN MY NAME ...
NO BULL CRAPERS !!! NO MEMORY LANERS !!!! PLEASE DONT CALL ME AFTER 9PM THANKS !!
336 344 Five zero one seven .

 

[Deepsubject]

 

[challenger6pak]

What intake is on it? Hard to tell with the small pics.

 

[moparlee]

Per site rules need price and location. Good luck with the sale.

 

[DetMatt1]

Per site rules need price and location. Good luck with the sale.

And price.

 

[Deepsubject]

Ettelbrock duel plain intake I can't take no less than 11,500

 

[Deepsubject]

I'm in Eden NC

 

[challenger6pak]

That intake won't work with Max Wedge heads.

 

[Deepsubject]

The casting number on head 518 ! so I'm I wrong that those was used on the the 413 ??
They are closed chamber!

 

[DetMatt1]

They’re 516 heads and are closed chamber but not max wedge. They have the smaller valves.

 

[challenger6pak]

There are smaller ports on non max wedge heads. The max wedge head ports are so large that the intake manifold wouldn't seal to them.

 

[Deepsubject]

This is why I don't like Most Mopar folks they get a orgasm just trying to prove folks wrong ! The heads was pulled from 413 ! I know that for a fact !