• Welcome to For E Bodies Only !

    We are a community of Plymouth Cuda and Dodge Challenger owners. Join now! Its Free!

FOR SALE 73 challenger pro touring build Tx

Status
Not open for further replies.

lxmodguy

New Member
Joined
Jun 24, 2014
Messages
1
Reaction score
0
Rating - 0%
0   0   0
Contact seller
1973 challenger that has been rotisserie blasted inside/outside/upside down. It was epoxy sealed. Front and rear suspension updated, front is coil over with rack and pinion HDK setup. Wilwood 6 piston brakes with black calipers and rotors. Rear suspension is Control Freak triangulated coil over. The chassis has all the US car tool upgrades. Trans tunnel upgrades, trans mount, torque boxes, sub frame connectors. Rust repair was completed on the floor, this was very minimal. There’s a lower quarter patch left on the passengers side to do and a wheel lip patch needed on the drivers side. There is also a little spot that’s a couple inches on the drip molding that will need a small patch. That’s it. Cars incredibly solid. seats, dash, trim pieces etc are all here. New RT hood here for it as well. 11k mile 6.4 hemi here for it as well. Sitting on new 18x8 and 18x10 wheels and tires. Infinity box wiring system here for the car as well. Entire car can be controlled from your phone once done. North of 40k invested so far. Located in Celina Texas 75009. Can help with delivery within 8 hours in any direction. 30,000obo. No trades.

921FC2AE-58A3-40C4-A59D-46454D28CC76.jpeg


14D0BBE6-6C40-494E-9759-58BEFAEC0904.jpeg


12FD74EC-5A3F-4D02-B74E-6E70E18974D3.jpeg


D2195846-4F43-430E-8268-336175CCC5AA.jpeg


4A79D629-9E16-4975-B190-A5943BF6E5E8.jpeg


4D42B6CE-3F76-48F2-97E0-CB846FE8126C.jpeg


A4ACF20A-6E78-4EB8-A8FB-F1EB055ECCAC.jpeg


B2D1F8C7-ACBA-4722-9B35-484366C20A06.jpeg


08ACA36A-74DD-45E2-AE07-02DE37A5EFC5.jpeg


C7A2F9D7-3754-417B-ADC5-610B195F134E.jpeg
 
Status
Not open for further replies.
Back
Top