I bought a 8 3/4 rear end housing and axles for my 70 Barracuda. Were the studs for the lug nuts, left hand thread? I was trying to chase the threads and noticed they were left hand threads (verified with a LH die). My 7 1/4 rear end has right hand threads. I measured the axles and the housing to be sure they were correct. The axles are 30 in from flange to splines, it has 30 splines. The housing is 46 in center to center on the spring perch and 56.5 in length, flange to flange. I still need to get a third member. Thanks in advance.
E body Axles
- Thread starter money pit
- Start date
70chall440
Well-Known Member
Yes, 70 still had LH threads on the one side (my 70 Challenger did which was one of the first things I replaced)
Okay. Thanks. I only checked one side.
70chall440
Well-Known Member
Only would have them on one side, other side is RH
Similar threads
- Locked
