hemi71x
Well-Known Member
My current pair of Sway Bar LCA's that i have for sale, UCA's, Strut Rods, Idler Arm
These are a pair of rebuilt lower control arms with sway bar mount tabs that are used on 1970 to 1972 B-body cars, Charger, Coronet, Road Runner, GTX,Super Bee, Satellite, Belvedere.
And also for 1970-1974 Barracuda's and Challenger's.
These parts are original to a 1970 Plymouth Cuda, if that means anything to you.
These are one of the best pairs of LCA's that i have pulled off a vehicle, cleaned up, bead cleaned back to bare metal, rebuilt, and put up for sale.
The UCA's and LCA's have new busings installed, and the uppers have new ball joints.
Strut rod bushings are near new, out of my stash of suspension & brake parts.
I have cleaned these control arms of 47 years of grease and grime, plus they have been bead cleaned back to bare metal, then painted up in black.
These control arms are not rust pitted pieces of junk like you find in the rust belt states here in America. These are one of the nicest pairs of lower control arms that i have come across, and rebuilt for re-sale. You can't go wrong starting out with parts from California, Nevada, Arizona, out here in the western states.
So if you factor in what it took to bust these LCA's off the car in the wrecking yard, then paying for them, buying the bushings, and rebound bumpers,doing the press work on the bushings, i need to see $300.00 for these parts. If you don't know how to rebuild these lower control arms it can be a pain in the butt to get them done.
I have a shop hydraulic press, and the factory tools to get these done correctly. Shop labor rates are $120.00 an hour where i'm at, and if i charged you 1/4 that it would be low. I have already done all the hard, dirty work for you. This is what i do as a professional auto mechanic, to help pay the bills in this life on planet earth, and to support my other hobbies, and buying other things here on this site. I can't pay my rent, go to the gas station, or grocery store, working for free, or minimum wages.
The price is "firm." I'm not interested in any kind of trades, offers, other than my stated price.
300.00 for the LCA's, + the FEDEX'ing to your zip code, with insurance, and signature delivery charges applied, + 3% Pay Pal fee.
I can be contacted thru this forum, by sending me a private message, and then i can send you all the rest of the necessary information.
$300.00 Lower Control Arms
$150.00 Upper Control Arms
$130.00 Sway Bar.
$20.00 Idler Arm
$125.00 Strut rods
Thank's a lot.
JimV.
These are a pair of rebuilt lower control arms with sway bar mount tabs that are used on 1970 to 1972 B-body cars, Charger, Coronet, Road Runner, GTX,Super Bee, Satellite, Belvedere.
And also for 1970-1974 Barracuda's and Challenger's.
These parts are original to a 1970 Plymouth Cuda, if that means anything to you.
These are one of the best pairs of LCA's that i have pulled off a vehicle, cleaned up, bead cleaned back to bare metal, rebuilt, and put up for sale.
The UCA's and LCA's have new busings installed, and the uppers have new ball joints.
Strut rod bushings are near new, out of my stash of suspension & brake parts.
I have cleaned these control arms of 47 years of grease and grime, plus they have been bead cleaned back to bare metal, then painted up in black.
These control arms are not rust pitted pieces of junk like you find in the rust belt states here in America. These are one of the nicest pairs of lower control arms that i have come across, and rebuilt for re-sale. You can't go wrong starting out with parts from California, Nevada, Arizona, out here in the western states.
So if you factor in what it took to bust these LCA's off the car in the wrecking yard, then paying for them, buying the bushings, and rebound bumpers,doing the press work on the bushings, i need to see $300.00 for these parts. If you don't know how to rebuild these lower control arms it can be a pain in the butt to get them done.
I have a shop hydraulic press, and the factory tools to get these done correctly. Shop labor rates are $120.00 an hour where i'm at, and if i charged you 1/4 that it would be low. I have already done all the hard, dirty work for you. This is what i do as a professional auto mechanic, to help pay the bills in this life on planet earth, and to support my other hobbies, and buying other things here on this site. I can't pay my rent, go to the gas station, or grocery store, working for free, or minimum wages.
The price is "firm." I'm not interested in any kind of trades, offers, other than my stated price.
300.00 for the LCA's, + the FEDEX'ing to your zip code, with insurance, and signature delivery charges applied, + 3% Pay Pal fee.
I can be contacted thru this forum, by sending me a private message, and then i can send you all the rest of the necessary information.
$300.00 Lower Control Arms
$150.00 Upper Control Arms
$130.00 Sway Bar.
$20.00 Idler Arm
$125.00 Strut rods
Thank's a lot.
JimV.
Last edited:
