Search results for query: *

Well at least he only ruined what appears to be a perfect deck lid with perfect paint. Someone should take away his drill

I used slick sand on my car and was pleased with the outcome. however it sprayed a lot different than paint and you need a large orafice gun 2.0 or larger. I sanded with 180grit then primered and it looks great.

10 bolt valve covers. I would say its a 360 magnum

I just finished all the body work on my car and used Evercoat rage(it's bright green in color. I've done a lot of body work over the years but am by no means a pro. I skim coated the whole car with rage, longborded with 60 grit then went over the whole car with icing(super thin filler that fills...

I think I'm finally done with all the body work and finished the priming and wet sanding. Now I can clean up all the dust Now I can start putting it back together. If I remember how

distribitor

Some more progress. Power steering pump - Crank , Water pump pully and distributor

Is your question is this car worth the price he is asking? If so in my opinion yes. The car seems to be in fairly good it aside from minor issues. the underside looks great even the paint appears pretty good although it does look like there is some "custom" work done under the hood. All of those...

Yes you are right I am eliminating them with a one wire alternator. I think I am losing my mind.the alternator won't eliminate the ballast resistor though will it? Also my battery is in the trunk. For asthetics not for racing.

From the centerline of the distributor hole to the cylinder head is about 2" so I would need a distributor about 4" diameter. The head wall is only 200 thousandths thick (approximatly 3/16") so I really don't want to grind into it.The OE distributor does clear but then I'm back to the start.

Hey all, I have another question maybe someone could help me with . I replace the OE heads with Edelbrock aluminum performer heads and want to replace the distributor with a ready to run unit so I can get rid of the ballast resistor and voltage regulator on the firewall (I have already smoothed...

I had a similar problem on my car and got a chrome drop base from Summit for about 20 bucks and now it clears no problem. The base dropped the filter about 9/16 of an inch

I would be very interested in the rear bench and the side markers. What is you location?

one side done one side done and I never want to do that again.

They are from March performance out of Naples Fla. I also have the power steering bracket and pulleys. They are great quality, clear coated aluminum and all the bolts and spacers were included

still waiting for push rods, should get them in a day or so. I just put it on to see if there was hood clearance, there is. I have a plug for my atv exhaust in the distributor hole I just removed it for the picture.

[/ATTACH] A little closer everyday -Thought I would share some progress shots if any are interested

I followed your directions and it woked just fine

http://www.forebodiesonly.com/forum/attachment.php?attachmentid=7409&stc=1&d=1331650744

It will work as my avatar but not in the thread