Search results for query: *

I'm interested. Still available?

Agree on W1/B5, ;)

I bought my new top from Convertible Top Guys. I got a white crush grain vinyl top with zippered glass rear window. I see that is selling for about $700 now. I installed it myself (no help). I would recommend having a friend help. I bought a good air driven staple gun. I watched as many you...

There is an oil called "clock oil". Specially formulated for clock movements.

Yup, rotating the dimmer switch back and forth will remove some corrosion from the contact area between the arm and resistive coil. The dimmer is a mechanical variable resistor.

I think these goobers are the parts you're inquiring about.

Welcome from Charlottesville (Earlysville) VA!

Here is some information. Drive shaft lengths...

Nothing beats a drop top. Sorry.

The first two are driver side and the one on the right is passenger side. Mine are all silver, even the pivot.

IMG_5486 shows the partial VIN: 0B150353 or 0B160353. If the VIN on the car is JH23H0B150353 or JH23H0B160353, the transmission is original to the car.

Is Herb's 1178 Bright Blue interior paint correct for 1970 Challenger B5 blue interior?

Looks like a windshield molding clip.

My tach would not work with the Pertronix electronic ignition. Went back to points and it works fine.

One other '70 Challenger dash difference. The plastic under dash pieces have different shaped edges where they meet the dash. The '70 dash will follow this edge pattern. '71 - '74 have a different pattern.

This may be the case for '70 and earlier B-body k-frames. I know my '70 Challenger had a k-frame that should not have been on the car. I tried to add a sway bar and the k-frame required the bar to pass in front of the k cross member, not through the cross member. I swapped the k-frame for an...

B body k-frame will have a 2 degree angle difference in the steering gear to steering column alignment. It will also not support an e-body sway bar. Other than those items, it can be used on an e-body.

Black on both sides, I believe.

Does the 187 not work for e bodies due to interference with steering linkage?

I've seen 440 oil pans with the following numbers: 187, 402, 699, and 971. Not sure of their applications except the two 187s I have were from '71 Imperials.