Search results for query: *

At $600 for new, I'd get a set asap and at least hang them on the wall like Excudame.

$439.

No stripes. The all-black is an iconic look. Story is cool but the stripes make the car look like a Chip Foose Overhaulin creation. Stunning car as it is.

Heads & bolds are sold; payment pending on the rockers. I'll mark the entire thread sold when funds are received.

Got it. You are 3rd. Nice looking Challenger in your avatar BTW.

SOLD New SM heads #PCE281.2146 65cc chambers 2.02/1.620 valves 11/32 valve stems Std rectangular intake port 170 cc intake runner volume OEM exhaust port Dual valve springs for max valve lift: .600" OD of outer spring: 1.250" 10* chromoly spring retainers & locks w/valve stem seals valve angles...

For Sale: Edelbrock CH-28 dual quad intake (#5440) for RB (440/413/426W) engines. New in box. Summit gets $504.95 + tax; buy this one tax free for $459 with the same free shipping from 99201. PayPal FF or US Postal Money order. PM me here please.

Briefly used on a small block application without issue, was going to pair this kit with the CH-28 intake for a street driven B-body but sold the project and this is what's left. Excellent condition. $849 + free shipping from 99201. PayPal FF or USPS money order please. PM me here.

New in the box Lunati small block hyd cam (#10200703) & hyd lifters (#71977PR-16). This is an older cam as the cam card shows adv dur: 271/279 (new grind is 268/276); 226/234 @ 050; 494/513" lift; 110 LSA. RPM Range: 1800-6200. Together these were $386.68 + tax & shipping; buy now for $349 to...

So, a freshly rebuilt blueprinted 440+6? Did you build it? If no, have you spoken to the builder? Do you have data from the dyno? Have you spoken to them? I'm in agreement with both camps - if you need to break-in the engine, run the manifolds & head piping away from the engine bay. If the...

Not sure if Pat Blais is still around but he'd be the guy I'd use. Here's a link to FBBO thread that might help if he's still in business... Trustworthy 727 Transmission Repair Seattle / Tacoma

Holly crap, your video triggered PTSD from my enlisted years in the Navy chipping superstructure paint and non-skid decking. Seriously, if I had to do an underside, the needle gun would be a strong first consideration. Thanks for posting.

Very nice Cratos. Stock springs or Espos +1? What offset on the rims?

Is there an exploded view of the grille area of the '72-'74 Challengers? Not just the 'frown face' insert but the headlight bezels/buckets, header panel, etc. I've got a '74 Challenger the prior owner replaced the front fenders with '70 AMD fenders and cut out the entire grille area of the...

Another positive report. Thanks rikkitik.

In time. It's still on the trailer under a tarp as I need to clear space in the shop by selling a 68 Dart.

Found one - it came attached to a car...

Will do. Thanks.

Thanks, Juan. I had considered something off the shelf as a 'kit' from one of the major manufacturers but the recent spate of 'cam failures' are likely due to poor cores from the foundry so I contacted a regional company I've had great results from in the past. He had an old school core on the...

Thanks for the real world usage report Steve and 'Psycho, your opinion is always highly valued.