Search results for query: *

Where should the fuel level be set on the out board carbs. I have read just at the bottom of the sight holes and also 1/2 up the sight holes to be even with the sight hole in the center carb which is higher?

I will try heavier springs. I have also heard about something called the "kill bleed" that effects when the secondaries start opening?

My experiement described above was a very slow accelerator push not a quick stomp. i am not sure that the accel pump has anything to do with it?

I have a new to me cuda with 1969 440 modified with, hooker headers, high flow alum heads, big cam, 3.55 gears, 4 speed, keith black pistons, etc. I just installed promax outside carb metering blocks with 82 jets and pink springs, 64 jets in the center carb with 3.5 power valve. In 2nd gear from...

I have a new to 1973 Barracuda with power steering. I need to take off the pitman arm but I am having a hard time finding a socket that fits the bolt. Am I missing something here???

I have a 1973 with power steer that I am installing a firm feel steering box. Car is new to me so I am just learning all the "tricks". I can not get the roll pin out from the column to steering box coupler. Which side do you drive it out from?

My distrib is a MSD unit without vac advance. I have the initial set to about 16. So the issue with the power valve is that it might be opening too early since the engine vacuum is low anyhow?

So my 440 six pack runs great but when I take foot off the gas and it returns to idle it almost dies. It does this driving and in the garage as well. It has power brakes, a big cam in it, and its a stick. If I blimp the gas a few times it returns to a good idle. I heard this is normal since it...

THANX..I now have the Rallie wheels and white letter tires on her.

After playing with it a bit, if you bend the tab down it effects when the fast idle comes on/off and if you bend it side to side you can adjust the rpm. Works good now...thanx forum!

Is that they way your 6 pack setup works? There is no "fast idle" screw?

anyone????

I have a new to me 1970 Barracuda with a 440 6 pack. I am fixing the several things wrong with it and one of them is the choke. There is no "fast idle" screw and my setup does not match other pictures that I have seen. I think Bubba has done some work on this. Can anyone tell me what its...

I have a new to me 1971 Barracuda. I want to add the "chrome" wheel well trim but I remember back in the day my 1972 rusted where the screws holding the trim went thru the body. How can I attach the wheel trim without causing future rust issues?

I need to repaint some pieces interior on my 1973 like the dash pad. It has the green interior. Does anyone know what paint supplier matches the OEM green in color and gloss?

I have a new to me 1971 cuda. It is the dark green metallic. Does anyone know what the stock hockey stick color is with this paint? I have heard black but I would think it would be a "gold" color?