WTB ‘Cuda Driver (LH side) door

[yellowtj69]

Desperately trying to locate a driver side door for my 72 ‘Cuda. Prefer a door that hasn’t been freshly painted or restored as it is going on a current build in progress. I’m located in the Bristol, VA/TN area.

 

[mrmopar340]

Do they still do the Mopar show at the dragstrip? If so that could be a place to find one.

 

[yellowtj69]

Do they still do the Mopar show at the dragstrip? If so that could be a place to find one.

Unfortunately they do not, it would be a real life saver if they did. The swap meet was always loaded.

 

[mrmopar340]

MDA car show is in Roanoke in March. Might find you something there. If you're attending I should be there as well.

 

[moparlouie]

I think I have one or two. I have to look; they may need some work. Bering original, What condition are you looking for before I do look.

 

[yellowtj69]

I think I have one or two. I have to look; they may need some work. Bering original, What condition are you looking for before I do look.

Awesome! The nicer they are the better. However, I’m mainly looking for a solid shell.

 

[EW1BH27]

As a PSA in case you didn't know, 1970 shells are unique but they'll work just fine across all years. Has to do with the stamping to accommodate the larger toothed arc of the '70 manual window regulator when used on a Challenger. I believe the inside is the same for both ebodies, just the skins change.

 

[EW1BH27]

Picture to back up my statement that I believe the inside is the same.

 

[yellowtj69]

As a PSA in case you didn't know, 1970 shells are unique but they'll work just fine across all years. Has to do with the stamping to accommodate the larger toothed arc of the '70 manual window regulator when used on a Challenger. I believe the inside is the same for both ebodies, just the skins change.

View attachment 119333

Thanks a bunch! I’ve currently got a ‘70 door on my passenger side. A ‘70 driver door would be that much better as I would have similar constructed doors.