wyckedtanker
Active Member
I've decided I need to focus on my paint and body work as well as going a different direction ith the powerplant with my father son build. So I am going to post what I have left here to see if anyone would be interested in it. I will split up and sell parts individually or sell all together
1967 block oil passages have been opened up slightly, the entire block has been smoothed and glyptol coated. Milodon oil pump. block is bored .040 over. New ARP main bolts, motor plate setup block
Rotating assembly is a steel crank, BME forged aluminum rods arp bolts, BME aluminum pistons, fully internally balanced high revving setup. 0 deck flat top pistons, clevite bearings
Crower 3 bolt solid roller cam .750/.750 114 LSA, Solid roller lifters with ties, Milodon single idler gear drive
452 casting cylinder heads square decked shaved and trued. combustion chambers are down to 82cc's, triple valve springs good to .800 total lift, valve job to 2.14/1.81 valves, ported/polished, have a set of new .039 head gaskets to go with them
the shortblock is fully assembled but can be pulled apart for sale of parts
asking $3,000 for everything pm for individual part prices and phone number
johnathan.fine@yahoo.com
1967 block oil passages have been opened up slightly, the entire block has been smoothed and glyptol coated. Milodon oil pump. block is bored .040 over. New ARP main bolts, motor plate setup block
Rotating assembly is a steel crank, BME forged aluminum rods arp bolts, BME aluminum pistons, fully internally balanced high revving setup. 0 deck flat top pistons, clevite bearings
Crower 3 bolt solid roller cam .750/.750 114 LSA, Solid roller lifters with ties, Milodon single idler gear drive
452 casting cylinder heads square decked shaved and trued. combustion chambers are down to 82cc's, triple valve springs good to .800 total lift, valve job to 2.14/1.81 valves, ported/polished, have a set of new .039 head gaskets to go with them
the shortblock is fully assembled but can be pulled apart for sale of parts
asking $3,000 for everything pm for individual part prices and phone number
johnathan.fine@yahoo.com
