SOLD 72 Challenger project, SW Ohio, sell or trade

[d fark]

I am listing my 72 Challenger project for $ 4500 cash(firm) or use as partial trade for a Fastback cuda or B-body driver quality car worth somewhere around $10- 12,000. The Challenger is an original EV2 hemi orange, 318/904, slapstick, front disk brakes, factory air.
Body and frame is very solid as are the quarters, doors, window channels, rockers, and firewall. Will need some trunk and floor repair but not extensive. If a trade I want a good clean driver quality car that I can fix up a little at a time. Let me know what you have and pics would be great. I have a clear Ohio title for the Challenger. We are located in SW Ohio near Dayton.

 

[a92dragon]

anymore pics?

Any interior pics, and underside pics of rear frame rails?

I am listing my 72 Challenger project for $ 4500 cash(firm) or use as partial trade for a Fastback cuda or B-body driver quality car worth somewhere around $10- 12,000. The Challenger is an original EV2 hemi orange, 318/904, slapstick, front disk brakes, factory air.
Body and frame is very solid as are the quarters, doors, window channels, rockers, and firewall. Will need some trunk and floor repair but not extensive. If a trade I want a good clean driver quality car that I can fix up a little at a time. Let me know what you have and pics would be great. I have a clear Ohio title for the Challenger. We are located in SW Ohio near Dayton.

 

[d fark]

Any interior pics, and underside pics of rear frame rails?

Sure stand by for more pics.

 

[d fark]

more pics

 

[a92dragon]

What exactly comes with the car?

What exactly comes with the car?

View attachment 13050View attachment 13049View attachment 13051View attachment 13052View attachment 13053View attachment 13054

 

[a92dragon]

What exactly comes with the car?

What exactly comes with the car?

 

[d fark]

What exactly comes with the car?

Basically the way you see it pictured. I do have most of the exterior trim pieces, (door, window, wheelwell mouldings) I have all the interior plastic, ( door panels, etc) front , rear seats, console. I have the headliner but it is junk but the wires are there. I planned on a whole new interior except for the seats and console. Instrument cluster looks ok but the dashpad needs replaced .
Needs front bumper and windshield.
There is some bondo in the passenger door post and front rocker area and the passenger door had been replaced. So it has been hit at some point in the past. The door hinges seem to be very solid and tight.
The door lines up pretty good . Frame rail under the rocker behind the torsion bar box is smashed like they may have run up on a stump or something. I'll try to get a pic of that . We were just going to cut out the bent part and replace with new metal to make it look nice. The torsion bar mount is fine and undamaged. Crossmember is solid and straight.
The engine is selling as pictured except I do have exhaust manifolds included.
The car is being offered just as I purchased it about a year ago and been stored inside my shop

 

[james_smith119]

Any chance you would sell the seats by themselves? I live in the same are and could pick them up.

 

[d fark]

For now I'm going to hang on to them. If nobody wants the car I will need them(someday)

 

[d fark]

Lowered price to $ 4000 for the whole car