SOLD E-body Parts Galore!!!

[EbodyPro572]

driver's door panel?

could use a new white driver's interior door panel. Anything?
Scott 248-941-2207

 

[chaps70rt]

Hi Scott ... I could probably use the white one an dye it, but that seems a shame. If the black was to scuff, the white base would show. Better that I wait for a good black one to come along.

Thanks ... CHAPS

 

[tailgunner]

74 Barracuda

Need mud shield that attaches to the frame right of the oil filter. (340)
Need mud shield that attaches to the frame forward left side just aft of the radiator.
Need fan shroud for 18x22" radiator.
Thanks, Mike

 

[CudaRescue]

Looking for a deck lid, a right fender for a 72 cuda, and am interested in that seat set please.

 

[Jay1454]

do you have a set of rear springs for a T/A part # 3400048

 

[cobrateck]

Interior panels in white "ORIGINALS" 1970 CUDA

Im looking for white "original" in good condition ...Interior panels for my 70 cuda. Mostly a passenger side rear panel.
If you have any white interior panels for sale I might be interested in buying them.. Send me some pictures to: 70hemicuda@dishmail.net

Thank You
BOB

 

[indy dart]

I would take the 23 spline and matching bell housing for a small block. Looking for a challenger rt hood and rear deck lid also.

 

[cobrateck]

Cuda rear interior panels (white) originals

I am looking for a set of original rear interior panels in white. Restore-able but not badly damaged

i finally finished my 1971 restro. So, i can get rid of all the extra parts that came with it.


Also i have 6 shelfing unit that are 6 feet high by 12 feet long full of cuda, challenger and charger parts that im trying to get rid of. Here are just some pictures of what i have taken and what i need to still take care of.

here's the parts i still have to go through.

here is the 1970 cuda with the 440 and 4 speed still in it.

i have a complete 1970 cuda bs23hob
torch red
no interior
4 speed transmission
needs floors and trunk.
Needs glass, trim, tail lights straight roller
with a few good motor options

no motor or trans - $4,000
440 with orginal 4 speed trans - $7,000
orginal 340 motor number match and the orginal numbers matching 4 speed - $12,000

i own a shop so if you rather not do checks or such and not local to pick we can worth with a credit card.
Hope this helps everyone understand why i havent really posted excatly what i have cuz i dont know everything yet.

 

[MoparGod]

How much for the 8 track radio bezel? Any damage on it?

still have this?

 

[MoparGod]

Beware of this guy, sold me the wrong parts, said he would refund my money and won't. won't answer the phone. He has no money and wants yours

Did you ever get the refund??

 

[sparkykd]

Yes I did, took awhile but he made it right.

 

[randys4406]

i dont know if i have anymore laying around, ill check in a few mins and let you know.

Are you interested in selling everything you have for a lump sum price?

PM randys4406

 

[jamesfillmore]

Looking for the shoddy pad / sound deadener rag under the cowl and the insulation pieces glued to the back of the kickpanels off an E body.

Mostly interested in the under dash sound deadener.

Have that? $75?

If it's in decent shape remove gently and shoot me a picture of it on the ground.

Thanks, Jim Fillmore
Detroit Muscle Technologies

 

[truetriplex]

I need a lower control arm (with sway bar attaching tab) and inner fender splash shields for a 70 Challenger.

 

[truetriplex]

Need lower control arm (with sway bar tab) for a 70 challenger

 

[Buddhascuda]

I need a 4 speed bellhousing for a smallblock do you have one and how much shipped to 06418

 

[Simple]

Looking for an original decent condition battery tray for a 70 Cuda

 

[moparleo]

3 year old post.

 

[challenger6pak]

Leo, they don't read them. They just post and wonder why they don't get a response.

 

[moparleo]

Also these ancient postings just add to the clutter anyway as you cannot delete old postings.