moaparman25
Active Member
Hey guys, I'm Scott from omaha, NE. I'm the owner of a 73 challenger I'm restoring and modifying to be a autoX 70 T/A clone. I've already swapped to a 70 front end (just need side markers), t/a hood and t/a decklid. Still need to swap out the tail panel. The car has a 70 340, stock bore and stroke, big cam, warmed over 2.02 J heads, Eddie air gap and 750 Holley. 727 trans and 8.75 w/ 3.23s. For the last 3 years it's been a "driving project" but I think in at the point where I'd like to tear it down and start the full build. Plans include stroking the 340, airwolf heads, and proform carb. Passon 5spd swap, and 3.91 gears. Upgrade the current front discs and add discs in the rear. US car tool complete chassis stiffening kit, hotchkis TVS, and 18in wheels with some sticky rubber. Interior will be a mostly stock style build with the exception of custom guages, with carbon fiber vinyl inlays everywhere there is fake wood haha. Anyway, in glad to be here, I spend most of my time on cuda-challenger.com (moparman82) but I'm looking forward to learning from you guys as well.
