Hemi Swap (Mopar crate controller and Sound German trans controller)

[mj73rallye]

Hey everyone, curious is anyone has done the Mopar crate controller with Sound German trans controller? I am having issues with gearshift blinking as if there is an error, when I hook up a computer to trans-controller to a computer diag, it moves through gears as it should and correctly. Vehicle will not sent a signal to start solenoid but if I turn on key, and jump the starter it will take right off and run smooth (trans shifter still flashing). Any thoughts?

 

[SFEbody]

Do you have a momentary switch push to start button? if not, you will need one. take the signal wire ( yellow ) from the harness and then out to the starter. Make sure you are NOT using the fctory starter relay that mounts to the inner fender, you must use the signal wire from the ECM harness

I have it and if you call Russell @ german sound, he can dial in remotely and fix your problem I had hte same issue and in 15 minutes he had the fix for it . He is amazing with the 8HP70 TCM

 

[mj73rallye]

Thanks for the info! Actually ended up finding out the issue...my poor wiring and had the trans "lockout" engaged. Ugh...