• Welcome to For E Bodies Only !

    We are a community of Plymouth Cuda and Dodge Challenger owners. Join now! Its Free!

Is this worth saving?

JDatDGR

New Member
Joined
May 6, 2023
Messages
2
Reaction score
0
Location
Rogue River. OR
Howdy,

We recently pulled this wrecked JH23N shell out the woods. According to the GG book it is 1 of 949 for whatever that is worth. Fender tag is present. The original 383 is rough but present with the numbers 727. Thank you for sharing your opinion. I am not afraid of this car because the tub is very solid, however I am more of a racer than restoration specialist. Any feedback is much appreciated. If it seems like a fool's errand it might become yard art.

20230505_194856.jpg


20230505_194912.jpg


20230505_194951.jpg


20230505_195023.jpg


20230505_195032.jpg


20230505_194711.jpg


20230505_194620.jpg


20230505_194620.jpg


20230504_120901.jpg


20230504_120854.jpg
 

413

Well-Known Member
Joined
Mar 23, 2019
Messages
193
Reaction score
99
Yes it is worth saving. But I’m not going to do it.

R/T with matching drivetrain and a good hi impact color.
 

JDatDGR

New Member
Joined
May 6, 2023
Messages
2
Reaction score
0
Location
Rogue River. OR
It is hammered that is for sure. I bought it for a few parts and started to feel bad for it.

My thinking is to see if I can get a clean title and check the block/trans for external damage.

1/4's, roof/dutch, doors, deck lid, finish panel, fenders, aprons and hood would be a very short list to get started. I think I could round all of that up for around 5k. Maybe 5k of my time to make it whole again. Spot welds are easy compared to fabbing stuff from scratch IMO.

The crux here is at what point am I building a car around a couple of tags?
 

Challenger RTA

Well-Known Member
Joined
Oct 28, 2018
Messages
3,441
Reaction score
1,824
Location
PA Flood city
Did you look for a broadcast sheet.What is the mileage on the odometer? The thing is there not made any more. And a numbers car and floor solid.It would be a passion project. If you have or could find a car for the donor parts. I would take all things in account that your considering. I have done worse.
 

440WB

Well-Known Member
Joined
May 30, 2015
Messages
449
Reaction score
50
Location
Michigan
Looks like she was used in a ' Fast 6 ' episode !

Nice color!
you have allot of if's to check out -
If motor / trans checks out...
If undercarriage is not bent/twisted to bad?
up/down - left/right - cross corner
I too have done similar 20 yrs ago when
parts / junk cars were easier to find -

-2cents -
 

BSG

Well-Known Member
Joined
Sep 26, 2018
Messages
349
Reaction score
75
I have a couple of frame rails and aprons laying around rust free as well as a complete windshield frame I saved out of a donor I too have done worse I have another one in me but not one like that again good luck!
 

MoparCarGuy

Well-Known Member
Joined
Jun 28, 2020
Messages
714
Reaction score
612
Strip everything that is salvageable off the car and assess from there. Not likely to be much left. Appears to be a car that was stacked at the yard.
 

Moparply

Well-Known Member
Joined
Mar 20, 2014
Messages
539
Reaction score
21
That could be the star of a new show! Maybe you could get a package deal from one of the AMD suppliers?
 
Back
Top