Pulley trouble

[71 shaker]

Hi Norway calling.
Wonder if someone can tell me the mesurement or Numbers for the correct pulleys on my 383, in a Challenger w/o ac ?
I got several, but they dont lines up...
Thanks in advance

 

[quapman]

Do you have power steering?

 

[71 shaker]

Hi, Yes i got PS on the car. Just forgot to tell.

 

[quapman]

I'll try to remember to measure one soon.

 

[704406]

Crank pulley 383-440 without a/c #1821452 fits E B and C body (2 groove)
Water pump pulley 383-440 without a/c # 2946789 fits E B and C body ( single groove)
I'll look later today, I think I have a complete pulley and alternator bracket set-up from a non a/c big block with power steering
I'm assuming you are working on a 70-71 original motor?

 

[704406]

Sorry, in my reply I've got the part numbers reversed. (I'll blame it on old age)
# 1821452 is the water pump pulley single groove
# 2946789 is the crank pulley 2 groove
# 1821452 is 2.710 inches tall and approximately 6 14/16 inches across. (my callipers only go to 6")
# 2946789 is 3.215 inches high and approximately 7 5/16 inches across.
I have a spare # 1821452 pulley thats what I measured, and checked it against an original 70 440 pulley.
The crank pulley from the 70 440 has no numbers that I could find.
Hope this helps, and sorry about the wrong part number info.

 

[71 shaker]

Hi, thanks for the help.
You writed "I'll look later today, I think I have acomplete pulley and alternator bracket set-up from a non a/c big block with powersteering"
Is this for sale?

 

[704406]

Yes I would sell what I have. $50.00 Canadian plus shipping.
Water pump pulley, Crank pulley and 6 retaining bolts, Alternator mount bracket and the 3 attaching bolts and spacers, alternator tension slotted adjustment bracket.
These parts are all off of a 70 440 non a/c equipped engine.
I will clean them up and take a picture next week if you are interested.
Cheers Ken

 

[71 shaker]

Hi Ken.
This is very interesting. I wait to hear from you about the shipping cost to Norway.

 

[704406]

I should get some idea of where you are in Norway so I can get a quote from Canada post or do you have a better shipping idea? Ive never sent anything to Norway before.
Do you have area codes or postal codes that will help me with calculating the shipping cost? Or is it just an address or city I need?
Ken

 

[71 shaker]

Hi.
Here it is:
Arne Lundblad
Asland 21
1860 Trogstad
Norway

 

[DetMatt1]

Yes I would sell what I have. $50.00 Canadian plus shipping.
Water pump pulley, Crank pulley and 6 retaining bolts, Alternator mount bracket and the 3 attaching bolts and spacers, alternator tension slotted adjustment bracket.
These parts are all off of a 70 440 non a/c equipped engine.
I will clean them up and take a picture next week if you are interested.
Cheers Ken

Incredibly nice of you, way to go, 2 thumbs up, etc..

 

[704406]

Hi Arne, here's a couple of pictures and a quote from Canada post. The weight is 2.9kg size is 21x21x15 cm smallest box the parts fit in.
Surface shipping [cheapest] $66.01 can takes 6-7 weeks. Xpresspost 7 days guaranteed $113.25
Sounds very expensive, let me know what you decide to do.
Cheers Ken

 

[704406]

Hi.
Here it is:
Arne Lundblad
Asland 21
1860 Trogstad
Norway

 

[71 shaker]

Hi Arne, here's a couple of pictures and a quote from Canada post. The weight is 2.9kg size is 21x21x15 cm smallest box the parts fit in.
Surface shipping [cheapest] $66.01 can takes 6-7 weeks. Xpresspost 7 days guaranteed $113.25
Sounds very expensive, let me know what you decide to do.
Cheers KenView attachment 48811View attachment 48812

Hi.
Thanks for the info. Expensive it is, but i need this stuff so i'v going for the cheapest alt.
I will send you a PM, and We take it from there.
Regards Arne