• Welcome to For E Bodies Only !

    We are a community of Plymouth Cuda and Dodge Challenger owners. Join now! Its Free!

Sputtering with new 750 Holley Double Pumper

moparnut74

Well-Known Member
Joined
Apr 12, 2012
Messages
72
Reaction score
2
Hello. I put a 750 Holley Reman double pump carb on my 340 and I notice with hard acceleration that I get a slight sputter and the odd backfire. Am I too lean ? Jetting issue ??? Holley recommended I increase the fuel squirter size to a .35.


Please help. Thanks !
 

Chryco Psycho

Well-Known Member
Joined
Dec 28, 2008
Messages
4,670
Reaction score
2,307
Location
Panama
not enough info to tell , you need to work through a prcess to set up any carb , Float levels adjusted correctly , idle mix adjusted equally , measure the vacuum & make sure you have enough vacuum idling in gear to keep the power valve closed , is it spuutering as the primary is opened , the accelerator linkage coul dhave play in it , or the squirter could be too small , , if it si stumbling as the ssecondary opens the rear accel linkage coul dhave play or have too small squirter or the float level could be low , does it run well after a second or too or does it continue to run badly ?
 
Back
Top