Ta 6 pak 340 heads

[kbmadness]

I have a set of TA heads (3418915) this is the number on the heads. 65cc combustion chamber. They have ported, New valves,(less an 500 miles) bronze valve guides , 3 angel valve job and 2.02" intake and 1.60" exhaust valves.
$950.00 O.B.O. and plus shipping.Can send pic's on request.

 

[Rob C]

Can you post up some pictures of the heads for proof of them actually being T/A heads?

 

[kbmadness]

here are the pic's

 

[Rob C]

I would need to see the hea as it lays flat, as if on a engine, intake side faceing the camrea which would be overhead to show exactly where the pushrod holes are drilled.

So far, they appear to be standard heads, 2 different ones at that.

 

[kbmadness]

I will take some more pic's today and post them for you. Joe

 

[kbmadness]

What do you see that make you think that their are two different heads? selling things is always a learning experience.

 

[kbmadness]

the heads are sold! thank you, joe

 

[Rob C]

One head has an E in the casting and the other has a P.

Come on now!

 

[193rdsow]

I have a set of TA heads (3418915) this is the number on the heads. 65cc combustion chamber. They have ported, New valves,(less an 500 miles) bronze valve guides , 3 angel valve job and 2.02" intake and 1.60" exhaust valves.
$950.00 O.B.O. and plus shipping.Can send pic's on request.

Do you still have these heads for sale? Plz call me at 717 880-2296

 

[superbirdrag]

Not TA heads

Hi
Follow this link and compare the heads, These dont look like TA. I have found heads that the casting number in the books say TA but are not.
The intake pushrod hole is alot futher from the runner for greater porting

http://speed.racingjunk.com/categor...-5418915.html?imageIndex=2&showSuperSize=true

 

[superbirdrag]

Here is a link to what TA heads look like check out the intake pushrod location

http://speed.racingjunk.com/categor...-5418915.html?imageIndex=2&showSuperSize=true