TA / AAR Upper Fender Studs

[Robert Conca]

Does anyone have there TA or AAR apart? I need the original upper fender stud measurement with a picture please.
Bob
robertconca426@gmail.com

 

[moparleo]

???

 

[DetMatt1]

The one he’s referring to, or at least I think, is attachment point on the cowl by the A-pillar.
It’s not specific to the Tran Am cars though…

 

[Robert Conca]

The black area Studs that hold the fender in place.

 

[Challenger RTA]

For one thing there are no tram measurements. 2 the fender studs or fasteners bolts or other. The are slots for movement to adjust fenders for body alignment about about a half inch both ways.side to side forward and back. just put all you ducks in a row if you like. the factory didn't care about that.

 

[Robert Conca]

Guys, the 70 TA / AAR have three studs and nuts on each side which attach the fender.
All I am looking for is when the fender is off the car and the three nuts are off the car and apart. I need the length and picture of the original stud from the factory.

 

[Challenger RTA]

You want the length of the stud? 1" if I recall.I have to check.

 

[Robert Conca]

You want the length of the stud? 1" if I recall.I have to check.

Yes please. The length with a picture to see if there is a stop on the stud
Bob

 

[Challenger RTA]

There is a what you are calling a stop no threads. I have to find one. someone might have a picture of one.