Torsion bar Tension Adjusting bolts

[jsand]

I have the height adjusted on the front of the car at 24.5” on both sides fender lip to ground. Car level and have rocked it up and down each time i adjusted the tension. I also lifted the front of the car off the ground each time i adjusted the tension bolts. The passenger side bolt is 1.75” outside the block more than the driver side. Why would this be the case? Do i need to pull the torsion bars and make certain the lower uca’s are at identical positions?

 

[Katfish]

Did you replace the bars?
One side may be clocked off 1 hex?

 

[jsand]

Yes, I replaced the bars.

 

[Katfish]

Got a pic of the 2 sides?
Almost 2" sounds like a lot

 

[Chryco Psycho]

The bolts should be backed out & the arms hanging low when the bars are inserted .

 

[jsand]

Thank you for the help.

 

[MoparCarGuy]

For reference and factory adjustment.