Sep 29, 2024 #1 G gtw940 Active Member Joined Jul 2, 2023 Messages 36 Reaction score 13 Location florida Fresh from the machine shop
Sep 29, 2024 #2 G gtw940 Active Member Joined Jul 2, 2023 Messages 36 Reaction score 13 Location florida Howard’s roller lifters, fit is way to tight, had a hard time getting them back out. At ropes end with machine shop and mopar.
Howard’s roller lifters, fit is way to tight, had a hard time getting them back out. At ropes end with machine shop and mopar.
Sep 29, 2024 #3 Xcudame Well-Known Member Joined May 27, 2023 Messages 1,591 Reaction score 1,196 Location Southeast Arizona I've posted this before. If I was going to run a roller cam and lifters, I'd go the route in the photo below. When you want to go fancy, you have to pay the price. Otherwise you're compromising.
I've posted this before. If I was going to run a roller cam and lifters, I'd go the route in the photo below. When you want to go fancy, you have to pay the price. Otherwise you're compromising.
Oct 6, 2024 #4 C cudamark Member Joined Dec 12, 2009 Messages 18 Reaction score 3 Are we seeing a crack here? I wouldn't run it like that if it is.
Oct 6, 2024 #5 S Steve340 Well-Known Member Joined Sep 19, 2016 Messages 982 Reaction score 393 Location New Zealand They will need to lightly hone those lifter bores - that will probably resolve the problem. It will need to be stripped and cleaned unfortunately.
They will need to lightly hone those lifter bores - that will probably resolve the problem. It will need to be stripped and cleaned unfortunately.
Oct 7, 2024 #6 Adam Well-Known Member Joined Dec 25, 2012 Messages 1,665 Reaction score 727 Location Washington Did you ask the machine shop to machine the lifter bores, when you dropped it off?