Wheel options?

[Jobu]

Need help. I am looking for used wheels and want to run a 275/60/15 in back. What are the wheel size options to run this. 7 or 8 inch? Back spacing needed for either? Also what are most running for front wheel sizes and tires? Suspension is all stock. Any input appreciated!

 

[1972 AAR Cuda]

I think you are close to the max size, but you should be able to go with a 285. I tried to max mine out with basically stock components (I did go with rear disc though) and I run a 285/40-17. The 17 was to allow for brake clearance and a little lower profile tire.

 

[moparleo]

8" about max keeping it stock height. 7" front. These are with a steel outer rim. Alloys tend to run 1/2 sizes 7 1/2, 8 1/2.

 

[6PKRTSE]

I ran 295/50/15's on the rear of my Challenger with 15x8 Rallye's with 4-1/2" b.s. before I mini tubbed my Challenger. These same wheels and tires are now on my Charger. Yes, these are a shorter tire but I didn't want the jacked up look.

 

[Jobu]

I think you are close to the max size, but you should be able to go with a 285. I tried to max mine out with basically stock components (I did go with rear disc though) and I run a 285/40-17. The 17 was to allow for brake clearance and a little lower profile tire.
View attachment 129144
View attachment 129145

What back spacing do you have on these?

 

[1972 AAR Cuda]

What back spacing do you have on these?

Front wheels are 8" wide with a 1/2" positive offset, the rears are 10" wide with a zero offset.