Search results for query: *

Welcome to FEBO. Yellowfish what color is you fish?🤔🤔

Keep in mind the range of motion that is needed.

Just a word of caution. If there are no heavy scratches I would not sand.

You don't see it until your done.

I did mine. If I were going to do it again I would do it outside. I think this guy can explain it better than me.

Good catch! 48 1/8" from the fire wall the front of the core support. Measure along the top of inner fender where the A/C lines run.

This is what I was referring to. I wasn't about to put the rubber bumpers on just then. A good while back I put a used bumper on so I could push and pull it around. If it is held up to the body and it matches check the brackets. Or the wrong ones.

I think you completely understood from your question. Just need an explanation. Remember if you have any trouble. The dash grounds are thought the defroster bolt, steering column , dash A pillar mounting bolts. Path of least resistance. Then the cluster and lights get it's grounds from the...

The video has to be put on you tube or some where. Then you post a link of it here. You did good on the pictures.

The area where the jack stands are.

Yes. If you can get pictures of the sides., the back, the trunk floor and the areas of the rust you mentioned. The area around the back window is also a problem area. An area you might not be able to get are the frame rails because the car sits low. If someone is agile enough might be able to do...

There are holes back further on the frame. At lest on mine take a look. The other thing do you have the right bracket?

Your in the wrong hole. Surprise! I have done that. Just reached around and stuck it in the first hole I found there.

When the instrumentation for our 60s-70s MoPars was designed, electromechanical devices were still far less expensive than semiconductor devices. That is why mechanical voltage regulators were used. Today, we can buy a semiconductor device for pennies (I remember paying DOLLARS for what is now a...

I think he was from the Midwest Dyer Indiana. I would have to look on the back of the picture.

https://www.forebodiesonly.com/forum/threads/dash-lights-a-brighter-possibility.34086/

That I don't know. Don't remember if it was an option when built. This was a good while back when people conversed via phone and mail. He sent me the picture. Yes I have it on my hard drives too.

It wasn't there. but it is now!

Yes. If you find wallered out hole weld a washer in the right place . Stretch spring with floor jack.