Sublime440
Well-Known Member
Chuck Lofgren built 496 stroker. I have every part number of all parts that went into this motor. 0 miles, Roller Rockers ported Rpm heads. H-beam rods and forged pistons. Bellhousing not included.
493 CI 4.360 bore 4.150 crank 6.76 rod length 11-1 compression. Ported RPM heads, camshaft specs 110 lobe center installed 105.5 gross lift .570/.562 duration 263°/266° Ross pistons, Eagle H-beam rods, Eagle Crank, block was ultra sonic checked
593 hp@ 5500 614 tq @4300
At 6,000 motor still had 582 hp and 510 tq.
$8000
493 CI 4.360 bore 4.150 crank 6.76 rod length 11-1 compression. Ported RPM heads, camshaft specs 110 lobe center installed 105.5 gross lift .570/.562 duration 263°/266° Ross pistons, Eagle H-beam rods, Eagle Crank, block was ultra sonic checked
593 hp@ 5500 614 tq @4300
At 6,000 motor still had 582 hp and 510 tq.
$8000
Last edited:
