Hi, There was tape around the vent line running from the filler neck through the right side of the trunk floor of my 1970 Challenger. The oval stainless piece is missing (photos attached). There is a grommet around the vent tube. I found a listing for the stainless bulkhead with 2 rubber grommets and it reads it is for non ECS fuel tank vent line. There is a photo of a new stainless bulkhead, would this be correct for a 1970 Challenger 318 car? Also the vent tube moves around and the rubber tube is kinked. Should the vent tube be anchored? If so, what does it attach to? Your help would be appreciated.
Last edited: