Edelbrock 1406 tuning

[Xcudame]

If you going to change carbs, personally I'd switch to the Holley 750cfm Demon! Closest thing to a Thermoquad that will bolt onto you TM6 intake!

Demon Carburetion 1904: 750 cfm Street Demon Carburetor 1-11/16" Primary Throttle Bores - JEGS

Get the Best Performance with Demon Carburetion 750 cfm Street Demon Carburetor 1-11/16" Primary Throttle Bores 1904 parts at JEGS. Shop Now at the Guaranteed Lowest Price!

www.jegs.com

 

[7DCUDA383A]

If you going to change carbs, personally I'd switch to the Holley 750cfm Demon! Closest thing to a Thermoquad that will bolt onto you TM6 intake!

Demon Carburetion 1904: 750 cfm Street Demon Carburetor 1-11/16" Primary Throttle Bores - JEGS

Get the Best Performance with Demon Carburetion 750 cfm Street Demon Carburetor 1-11/16" Primary Throttle Bores 1904 parts at JEGS. Shop Now at the Guaranteed Lowest Price!

www.jegs.com

I'll look into it

 

[Xcudame]

Here's a picture of the Holley Demon I bought on a Holley Street Dominator intake.

 

[Daves69]

Maybe some of this is relevant...........

https://www.mymopar.com/downloads/carterafbtuning.pdf

 

[7DCUDA383A]

Here's a picture of the Holley Demon I bought on a Holley Street Dominator intake.

View attachment 128978

Do you have a gap like I do.

 

[Xcudame]

Not sure. The Street Dominator I have is for the 440/413 raised block. I'm in Kentucky and can't check my TM6 on a 383, sadly. However, that particular gap is A okay as the sealing are is deeper inside

 

[Ricks72Chlgr440]

Do you have a gap like I do.View attachment 128985

Perfectly normal for heads with the heat crossover. Heads without the HX like my Trickflow 240's don't have that.