Hello, I'm build a 72 barracuda and picked up a six pack setup years ago. Finally getting motor set up, 360 with x heads, and was planning on sending the carbs out to be rebuilt. This setup has been off a car for along time and I always wondered if it was og off an aar or ta or a kit purchased later. Also want to know who is the best to have them rebuilt and setup. I'm in sw Washington state. Thanks for any info. I'm including some pics.
Six pack is this original setup? Where to get rebuilt?
- Thread starter shawnhigh
- Start date
sixpactogo
Well-Known Member
It looks correct and pretty complete to me. Missing a couple of throttle linkage pieces. I don't have any tips on who rebuilds those carbs though. Someone will chime in.
I had a 440 Six Pack on my Challenger so not sure if the small block used the vapor separator and return line or not.
I had a 440 Six Pack on my Challenger so not sure if the small block used the vapor separator and return line or not.
Chryco Psycho
Well-Known Member
Look like original , the list # & date line up
pschlosser
Well-Known Member
You also may want to think about which of two ways you want these carbs rebuilt. I see two options:
1. cleaned and rebuilt with "rebuild kits" and made fully functional, but will still looked "aged."
2. restored, including plating the "cadmium" yellow finish.
A lot more people (myself included) can clean and rebuild these, and several of us frequent this forum. But the 2nd option will cost you considerably more (3x or more) since there is acid washes, polishing and plating involved.
1. cleaned and rebuilt with "rebuild kits" and made fully functional, but will still looked "aged."
2. restored, including plating the "cadmium" yellow finish.
A lot more people (myself included) can clean and rebuild these, and several of us frequent this forum. But the 2nd option will cost you considerably more (3x or more) since there is acid washes, polishing and plating involved.
DetMatt1
Well-Known Member
Nice!
Woodruff Carburetor Specialties is one of our vendors at the top of the list on the right of this very screen/page. They do great work.
Woodruff Carburetor Specialties is one of our vendors at the top of the list on the right of this very screen/page. They do great work.
Cuda Hunter
Well-Known Member
Carburetor Restoration - Scott Smith
Scott Smith carburetor restoration Call Scott Smith Harms Best Carburetor restorations
www.harmsauto.com
Scott Harms is one of the best. I have a set up restored by him and it looks amazing!
Cuda Hunter
Well-Known Member
Do some searching for original AAR carb numbers. AAR's are as popular as hemi's so there is a lot of information on here.
Similar threads
