• Welcome to For E Bodies Only !

    We are a community of Plymouth Cuda and Dodge Challenger owners. Join now! Its Free!

Vapor canister or vented gas cap

Cuda U Code

Well-Known Member
Joined
Apr 21, 2023
Messages
45
Reaction score
18
Location
TN
After researching this topic, I am still confused so I hope someone can answer this question. I have a 70 Cuda 440, 4 barrel carb, and 4 speed manual trans.
car was built in April 1970.
The question is: would this car have been built with a Vapor canister and return line to the tank, or did it have a vented gas tank cap, or neither? At present, it doesn’t have either and I am experiencing 2 issues that point towards a problem with vacuum in the tank. The first problem is a grumbling noise coming from the tank after the car has been warmed up and then turned off, the second indicator is if the car sits for a week or longer, it takes several seconds of cranking it over before getting fuel to the carburetor. Any help is greatly appreciated.
 

1972 AAR Cuda

Well-Known Member
Joined
Sep 24, 2019
Messages
207
Reaction score
160
Location
Washington state
I understood the gas tank vent system (charcoal canister) was a California only requirement in 72. My 72 340 Cuda (California car) was built with the charcoal canister. Maybe others can add more info (or correct me if I am wrong).
 

Chryco Psycho

Well-Known Member
Joined
Dec 28, 2008
Messages
4,723
Reaction score
2,379
Location
Panama
In 70 all had vented caps which changed in 71, the only exception in 70 might be N95 california emissions cars
 

Xcudame

Well-Known Member
Joined
May 27, 2023
Messages
1,735
Reaction score
1,301
Location
Southeast Arizona
Chryco Physco is spot on! My 70 Challenger WSS built in LA has the 1/4" fuel return line and the extra vent tube in the truck. Federal cars had the vented cap in 1970.
 

Steve340

Well-Known Member
Joined
Sep 19, 2016
Messages
989
Reaction score
399
Location
New Zealand
I purchased a repro vented/pressure cap for my 1971 on Ebay for around $40. That was a year or two ago so they have likely got more expensive.
 

MoparCarGuy

Well-Known Member
Joined
Jun 28, 2020
Messages
714
Reaction score
612
The 1970 VENTED ANTI SURGE fuel cap in repro (currently $75) and the original 1970 Cuda cap installed. There is an incorrect repro out there but it has raised lettering with the ANTI SURGE on top and the VENTED on the bottom.
Stant E-body 1970 gas cap.jpg
70 cuda GAS CAP.jpg
Incorrect Gas Cap for 70 E-Body non-ECS.jpg
 
Last edited:

rs1

Well-Known Member
Joined
Aug 14, 2011
Messages
215
Reaction score
6
Where did you buy that cap?
 

SRKlegin

Well-Known Member
Joined
Oct 11, 2021
Messages
152
Reaction score
34
Location
Roy, UT
I understood the gas tank vent system (charcoal canister) was a California only requirement in 72. My 72 340 Cuda (California car) was built with the charcoal canister. Maybe others can add more info (or correct me if I am wrong).
Can you source a new cannister assembly for a 1972 Barracuda? My car was bought in Oregon.
 
Back
Top