• Welcome to For E Bodies Only !

    We are a community of Plymouth Cuda and Dodge Challenger owners. Join now! Its Free!

Are you sure you want to try to restore your own dash pad??

hsb shadow

Well-Known Member
Joined
Dec 30, 2022
Messages
129
Reaction score
100
Location
43040
That's great to hear. One of the main principles is when you have cracks in the dash pad it rolls up as it shrinks so you have to be willing to cut the vinyl back a good ways. If you can lay a ruler across the crack and it's flat you're fine but if it's holding the ruler up at any location it's not perfectly flat then you need to take more vinyl out. There are a few videos out there if you search for cracked dash repair. Good luck
 

larry4406

Well-Known Member
Joined
Sep 17, 2022
Messages
88
Reaction score
46
Location
Northern VA
Randomly came across this publication the other day. Note page 8 for padded dash repair.
 

Attachments

  • The Book Of Plastic Repair.pdf
    2.2 MB · Views: 63

hsb shadow

Well-Known Member
Joined
Dec 30, 2022
Messages
129
Reaction score
100
Location
43040
That's a nice review on how to do it. I pretty much did technique One with creating the v and then fusing the plastic rod and grinding and texture
 

hdwrench

Well-Known Member
Joined
Mar 3, 2023
Messages
254
Reaction score
87
Location
western new york
update , i almost have my cap installed. i did it one area at a time . after trimming the high areas and filling in some lows and cracks in the base foam . i’m actually happy with the results. looks darn good for the time and money invested. a few small flaws but will work fine until i locate a new pad….i stated by dry fitting and trimming any high spots , clamping for a good fit useing vise grip c clamps of all sizes and wooden blocks against the cap to distribute pressure. un clamped the windshield side of cap and silicone glued vent and vin tag areas . clamped and let cure 48 hours . then un clamped opposite and sides of cap , applied glue about an inch from edges and re clamped the whole thing . again let cure 48 hours until i removed clamps . at the area above the glove box i used 2 ratchet straps and a wooden 1x2 to keep pressure there …

FFD28840-8875-473C-9F21-9DC228905680.jpeg


0BA630A6-DDA7-4A3C-AD6F-967E172FE6E7.jpeg


778D149F-9078-46A3-B18E-14A1BFC44E82.jpeg


076C84B4-B44D-4A10-A424-E0184DD5F24A.jpeg


33A8EE85-0430-4CE4-8730-32BEB26578A0.jpeg
 
Last edited:

Katfish

Well-Known Member
Joined
May 14, 2022
Messages
443
Reaction score
242
Location
Palm Bay, FL
Nice!
I’ll say it again, the dash capped dash I took off looked better than what I got from the Texas guys.
 

hsb shadow

Well-Known Member
Joined
Dec 30, 2022
Messages
129
Reaction score
100
Location
43040
Looks like a very nice job. Congratulations. Sometimes I think we try to make these original $4,000 cars too perfect.
 

Challenger RTA

Well-Known Member
Joined
Oct 28, 2018
Messages
3,449
Reaction score
1,824
Location
PA Flood city
global warming
That's not what it's called now. The vernacular now is climate change.
My dash pad has survived Eco-pocalyptic-predictions. https://cei.org/blog/wrong-again-50-years-of-failed-eco-pocalyptic-predictions/Acid rain, 70's coming Ice age, Ozone depletion, Three mile Island.That there now reactivating for AI power. The planet has a fever. Sea levels rising. almost for got Cow farts
The one thing that it almost sir-come to was the wanting of A/C vents in the dash. I have the parts. I just can't bring myself to do it a perfect dash. If it was damaged yes.

DuixfA3U8AAPNul.jpg
 
Back
Top